I2M Chrome Pro 2 Dashboard Ducati 899/1199/959/1299 with 8.5mm Adaptors
SKU
CROR2P
Views: 0
£2,452.18
Features:
5 "color graphic display 800x480
Very high visibility even in direct sunlight
1GHz processor with 1GB of RAM memory
Aluminum CNC case
Fully configurable pilot and mechanic pages
Trajectory detection and GPS speed at 10Hz with 66 channels in parallel
Stopwatch function with 20 preset circuits, memory of 500 laps per circuit
Automatic recognition of the circuit, with four sectors
Calculation of best lap, ideal, difference with the best lap or with the last lap, historical and current day maximum values
Programming via USB stick, WiFi or with USB cable (otional)
11 fully configurable high brightness RGB alarms
IP67 protection
Polar H7 or H10 heart rate belt connection
Attention: sensor support not compatible with original Ducati V2 wheels
8 10-bit analog inputs
2 speed inputs and 1 RPM input
Separate fully configurable water, petrol and oil inputs, also Can Bus
128 channels of Can Bus acquisition at 500Hz each
Data download via USB stick, or WiFi
Possibility to connect a two button remote control without additional interfaces
Auxiliary can bus for expansion modules
Storage on 16GB internal memory
Possibility of webCam C270 connection for synchronization of the acquired data
3 different distance meters, 2 operating hours and total laps
Integrated lambda probe controller and BOSH LSU 4.9 sensor included
TPMS receiver with 4 pre-programmable channels per wheel and two sensors included
5 "color graphic display 800x480
Very high visibility even in direct sunlight
1GHz processor with 1GB of RAM memory
Aluminum CNC case
Fully configurable pilot and mechanic pages
Trajectory detection and GPS speed at 10Hz with 66 channels in parallel
Stopwatch function with 20 preset circuits, memory of 500 laps per circuit
Automatic recognition of the circuit, with four sectors
Calculation of best lap, ideal, difference with the best lap or with the last lap, historical and current day maximum values
Programming via USB stick, WiFi or with USB cable (otional)
11 fully configurable high brightness RGB alarms
IP67 protection
Polar H7 or H10 heart rate belt connection
Attention: sensor support not compatible with original Ducati V2 wheels
8 10-bit analog inputs
2 speed inputs and 1 RPM input
Separate fully configurable water, petrol and oil inputs, also Can Bus
128 channels of Can Bus acquisition at 500Hz each
Data download via USB stick, or WiFi
Possibility to connect a two button remote control without additional interfaces
Auxiliary can bus for expansion modules
Storage on 16GB internal memory
Possibility of webCam C270 connection for synchronization of the acquired data
3 different distance meters, 2 operating hours and total laps
Integrated lambda probe controller and BOSH LSU 4.9 sensor included
TPMS receiver with 4 pre-programmable channels per wheel and two sensors included
